Average Reviews:
(More customer reviews)The J3 Cub is unique in that it will fly very well slow speeds and is capable of going fast as well. It has scale features like molded windows,molded wing struts, scale landing gear, and machined aluminum rear tail wheel. The quality of this plane is a cut above the rest. Features a really good radio that has very good range. All in all a really good RTF kit.
Click Here to see more reviews about: J3 Piper Cub Super Class Electric RTF RC Plane with 2.4 Ghz Rx and EPP Foam New
The J3 Piper Cub Super Class RTF takes electric rc planes to a new level of detail and flight performance. Designed with realistic 100% scale features like an aluminum tail wheel, life like wing and tail struts, engine cowling, clear molded windows and high quality rubber wheel landing gear. Powered by a 1200kv brushless motor running an 11.1 volt Lipoly 20c rated battery pack for a top speed at over 60mph at full throttle. Want to fly slow? The J3 Piper Cub can easily fly around at 1/4 throttle (10mph) to suite the novice as well. The J3 was designed tofly at both ends of the spectrum. This enables the novice to grow with it as he or she learns to fly. The J3 can be flown with mild aerobatics as one progresses in flying skills.The J3 Piper Cub is able to take off grass fields with ease due to its larger sized rubber wheels. This also helps in providing realistic landings as well. The landing gear has a slight springy bounce to it so landings are not only cool but 100% realistic in its overall feel.Offers full 4 channel proportional control: Rudder, Elevator, Ailerons, ThrottleMade from super Durable EPP Foam that is several times stronger than standard styrofoam. EPP foam tends to be slighly heavier than styrofoam and that makes for better wind penetration. That translates into a more stable aircraft , that's less likely to have the wings tipping and bobbing in light winds. Easily fixable foam with any two part epoxy.Specifications:* Wingspan: 1020mm (40.2 inch)* Length: 690mm (27.1 inch)* Wing Area: 15dm2* Wing Loading: 53g/dm2* Thrust: 520g (18.3 oz)* Flying Weight: 650g (22.9 oz)* Drive System: DST-1200 brushless outrunner motor* Speed Controller: 20amp brushless ESC* Servo: 2X 9g + 2x 5g high speed micro servos* Battery: 11.1V 3S 1300mAh 20C Li-Po* Control system: 4 CH 2.4GHz Multifunctional Transmitter and 6 CH Receiver* Radio Control Range: 4000 feet* Made from Ultra Durable EPP Foam.
0 comments:
Post a Comment