Average Reviews:
(More customer reviews)This is a great remote control model. I have enjoyed this plane for 8 months.
Note: There is a powerful electric motor inside, you can be seriously hurt. Be sure to seek help with this from your local RC Model club.
I got this plane at a local shop. Picked up the ready to fly kit.
Easy to assemble but, the kit did not include any glue. No big deal but you will need to get foam safe epoxy and cyanoacrylate glue.
The manual is excellent, no issues.
Kit includes a 3200mAh battery, which if your gentle on the throttle, you can achieve +30min flight time.
The charger is a little "left to be desired". It will get the job done but if you get serious, make the investment into a good balance charger.
The only "upgrade" made was to the wheels. The kit includes foam wheels which are to small in diameter for where I fly it. I upgraded these to the Du-Bro 2.25" #225TL for the rear and a #225T for the front. A consequence of this is a little bit more weight, but landings are much improved on the gravel.
Flight characteristics are predictable. It is about the size and shape of the traditional .40 trainer, so it is slow and forgiving.
It is a BIG foamy but very light, so it can be a significant challenge in even moderate wind. Adding a second battery help immensely, even if it is not plugged in. The added weight keeps the plane from bobbing around.
There is also a hi-low rate switch on the transmitter which helps slow the responsiveness significantly. This too helps smooth-out pilot jitters. Also, when I assembled it, I put all of the control linkage in the last hole of the control horns, which further reduces the control sensitivity.
USE the battery straps! You have been warned.
Problems:
Most of the problems with the plane are pilot induced. That is, I caused them.
However, there is a bulletin for the plastic caps on the ends of the metal bars that go through the fuselage for the rubber bands to hook onto. The caps have been show to come off the ends of the bars. So, when you glue the main wing together during the assembly, be sure to dab a little on the caps.
I have crashed this guy a few times, in fact it is waiting to be repaired now. Every time I am amazed at how well it takes my abuse.
That being said, there are a few things to look for:
Hard landings will loosen the battery box and bend the nose gear. Both of these are easy to fix, but be careful about the screw the holds the nose gear. The wheel is held in place with a a screw that threads through plastic, too much torque and the plastic will strip-out. To fix the battery box, use some epoxy
Over time the servos will get loose. Again a little epoxy will stiffen up the mounting.
The clevises are plastic. In one of the more serious crashes, the pin in the rudder clevis was sheered off. Finding the part locally was impossible because the clevis is 0-80 gauge, not 4-40. So the linkage had to be redesigned.
Spahz
Click Here to see more reviews about: Apprentice 15e RTF with DX5e Radio
Looking to learn to fly? With the assistance of a club instructor, the E-flite®Apprentice™ 15eRTF is the perfect trainerfor learning the basics and beyond. The Apprenticeis a 15-size high-wing trainer that comes with everything you need to go from buy to fly. This one-box purchase includes the full range DX5e Spektrum radio with the 2.4GHzinterference-free technology, AR500 receiver, and a 3S 3200mAh 15CLi-Po battery and charger.There is no building required—just charge and install the included battery, mount the wing and tail, and fly.
The Apprentice is powered with a 15-size brushless outrunner providing excellent power and performance. This trainer has a flat-bottom wing and produces gentle flight characteristics. The Apprentice is made from durable, lightweight Z-Foam™, making it great for training and sport flying. Every beginner pilot experiences their share of bumps and bruises, so the Apprentice's durable build and easily repairable construction ensures more opportunities for success. The Apprentice is the perfect training aircraft thanks to its gentle flight characteristics. This model is equipped with tricycle landing gear allowing better ground handling over tail-dragger aircraft. This landing gear setup is durable and will also allow takeoffs and landings on maintained grass runways. This is a high quality trainer with an excellent setup, taking the pilot from beginner to basic aerobatics all from this one-box purchase. Go from buy to fly with the Apprentice.
Get 29% OFF
Click here for more information about Apprentice 15e RTF with DX5e Radio
0 comments:
Post a Comment